Tutorials BimCraft help Walkthroughs
Draw at full size, annotate by scale
The building is always drawn at full size. Text, dimensions, tags, room names, grid bubbles and symbols are sized on paper, in millimetres as printed, and keep that size when a drawing's scale changes from 1:100 to 1:50.
Written for BimCraft 0.10. The same help is inside the app: press F1.
What you'll do
Set how tall the lettering of your drawings is on paper, once for the building. You never scale the model and you never resize text for a scale: BimCraft works out the size from the paper height and the drawing's scale.
How it works
- The model is full size. A wall 10 m long is 10 000 mm long at every scale.
- An annotation has a paper height: the height of a capital letter on the printed sheet, in millimetres.
- At a scale of 1:100 a 2.5 mm text is 250 mm tall in the model; at 1:50 it is 125 mm. On paper it is 2.5 mm both times.
- Plan symbols (electrical, plumbing) are drawn in paper millimetres and follow the same rule.
Steps
- Open the project browser. Under Sheets click Annotation sizes….
- Type a height in millimetres for the kinds you want to set: Notes and labels, Dimension text, Tags and level names, Room names, Grid bubble letters, View titles on sheets and Schedule text. An empty box keeps BimCraft's own size, shown in grey.
- Click Save. It is one step you can undo.
Every sheet, the drawing set, the plan PDF and the elevations and sections use the sizes from then on. The gap between a dimension line and its text, the size of a grid bubble and the height of a schedule row grow with their text.
A plan with a scale of its own
Give a plan a scale in its view range (Scale; see Views and sheets). Then:
- on screen, room names, tags, dimension text and grid bubbles are drawn at their printed size against the model, so what you see is what the sheet will show;
- plan symbols and their tags are sized for that scale. Change the scale from 1:100 to 1:50 and they are half as large in the model and the same on paper.
A plan with no scale of its own keeps its fixed screen text, and its symbols are sized for 1:50 (1/4" = 1'-0" in feet and inches), as before.
Your office's sizes
With the Default Policies add-on on, set the office's heights in Settings › Global › Default Policies › Annotation sizes on paper. A new building takes them when you click Create. In a building you already started, the dialog has Use my office's sizes. See Default Policies.
A regulation pack's sizes
A regulation pack can give the text heights its place asks for (the Building regulations add-on, drawing conventions). Tick the pack in Settings › Building regulations, then in the dialog click Use a regulation pack's sizes: the boxes fill in, and you check them and save. A size a pack gives in points is a font size, and it is turned into a capital height, so check it. Nothing is set until you save.
What you should see
- The same text height in millimetres on a sheet at 1:100 and on a sheet at 1:50, while the plan itself is twice as large at 1:50.
- The sizes travel with the building: they are saved in its IFC file.
Good to know
- BimCraft's own sizes are the ones its sheets have always used (about 1.5 mm capitals for dimension text). They are not a drafting standard: set your office's.
- A height must be from 0.5 to 50 mm.
- Title block lettering and keynote legends are not part of this: they keep their own sizes.