Tutorials BimCraft help Walkthroughs

Curtain systems: glazed walls on a grid, with mullions

Draw a curtain system like a wall or lay one on a face, then set its grid lines and its mullions. It is saved as an IfcCurtainWall with its panes and mullions.

Written for BimCraft 0.10. The same help is inside the app: press F1.

What you'll do

Make a glazed wall of panes between mullions, change where its grid lines are, and choose which lines carry a mullion.

Steps

  1. Turn Draw on and open the Build menu (in a ribbon layout: the Architecture tab).
  2. Choose Curtain System. In its row set the top (the level above, or a height), a line every so much along it, a line every so much up it (leave empty for none), whether it gets mullions, and the mullion profile.
  3. Click where it starts and where it ends, as you draw a wall. Shift keeps it square.
  4. To change the grid choose Curtain Grid and click the system:
    • Add a line: an upright line goes where you click. For a level line type its height in At first.
    • Move a line: click the line, then where it goes.
    • Remove a line: click the line.
    • Set by spacing: type the spacing in Every, then click the system.
  5. To change mullions choose Mullion, pick what it works on (the upright line you click, the level line at a height, the border, or every line), choose Place mullions or Remove mullions and a profile, then click the system.
  6. Select a system to see all of it in Properties: every grid line with its place, a tick for its mullion and a button to remove it; the spacing; the border; the profile; the pane thickness.

By Face

By Face makes a curtain system on a flat face you click in the 3D view. Its row has the same grid and mullion settings.

  • It works on any flat face of any element the 3D view shows: a mass, a wall, a floor, a roof plane, a column, a placed item. The face can be upright, sloping or level.
  • The system takes the face's outline. A gable or another odd shape cuts the panes and mullions to it.
  • It can make a wall instead, along the foot of an upright face and as high as the face. A wall here always stands upright, so a sloping or level face cannot take one.
  • It does not make a roof. A roof in BimCraft is worked out from a level's outline and a pitch, not from a single face.
  • A curved face is many small flat faces: one click takes one of them.
  • A face with openings in it: the system covers the face's outer outline.

How it is measured

  • Gross area is the system's outline.
  • Glass area is the panes as made: each pane loses half a mullion width on a side with a grid mullion and a whole width at a border mullion.
  • An upright mullion runs through from border to border. A level mullion stops at every upright mullion and at the border. Border mullions lie inside the outline; where two meet, the more upright one runs through. Joints are cut square, not mitred.
  • Schedules has a Curtain systems list with these numbers once the model has one.

In the IFC file

An IfcCurtainWall on its level, made up of one IfcPlate (curtain panel) per pane and one IfcMember (mullion) per mullion piece, each with its own shape, material and base quantities.

Good to know

  • Any size is made as you ask. Only an outline with no area is refused, because there is nothing to make.
  • A system drawn like a wall keeps the height it was drawn with. If you move a level later, set its height again in Properties.
  • The Move tool does not move a curtain system yet. Delete it and draw it again, or change its grid in place.
  • Undo takes back each step: the whole system, one grid change, one mullion change.