Tutorials BimCraft help Walkthroughs
Send an element to PartCraft and take it back
Pick a support, bracket, railing or piece of equipment, design it as a part in PartCraft with the building around it, and accept the new shape back into the model.
Written for BimCraft 0.10. The same help is inside the app: press F1.
What you'll do
Design one element of the building as a part: send it to PartCraft, change it there (cut, add, drill, resize), and bring the new shape back into the model.
Steps
- Pick one element in the model: a generic element, equipment, a column, a beam, a railing or furniture.
- Choose Part links on the toolbar and then Send to PartCraft. PartCraft opens in a new tab with the element as a part. The elements within 3 m are drawn grey beside it so you can design it in place. They cannot be changed there.
- Change the part in PartCraft. In PartCraft choose File › Export › Save back to BimCraft. You can save back as often as you like.
- Back in BimCraft the Part links button shows a count, and the card lists the element as Changed in PartCraft with the size and volume change in words.
- Choose Show to look at it, then Accept to give the element the new shape, or Keep mine to leave it as it was.
What you should see
- Accepting is one undo step. The element keeps its place, GlobalId, type, material and properties. Only its body is replaced.
- The element gets a property set CadCraft_PartLink with the link, its status and the revision.
- Send again opens the same element in PartCraft once more, on the same link.
Good to know
- Walls, floors, roofs, doors, windows, stairs, ramps and spaces are drawn by the building tools from an outline and rebuilt after every change. A body from another app would be written over, so these are refused with a reason.
- The shape comes back as a mesh (an IFC tessellation), not as the part's features. The part's history stays in PartCraft.
- If the element changed in the model after you sent it, the card says so before you accept: accepting replaces those changes.
- Nothing is uploaded. The two apps are pages of one site and pass the element between them in this browser. Both need to be open in the same browser.
- The element must close into a solid in PartCraft. An element whose shape has large open gaps is refused there with the number of open edges.
- To accept, make the model that holds the element the active one.