Tutorials BimCraft help Walkthroughs

Mark elements as checked or field-verified

An element read from a PDF or a scan is unverified until you check it. Mark elements as checked, or as field-verified (LOD 500) with who measured them, when and how, and hand over an as-built model that says which is which.

Written for BimCraft 0.10. The same help is inside the app: press F1.

What you'll do

Keep track of what in the model somebody has actually looked at. An element has one of three marks, or none:

  • Unverified: the program recognised it from a PDF, a scanned drawing, a traced drawing or a point cloud scan. Nobody has checked it yet.
  • Checked: a person compared it with the drawing it came from.
  • Field-verified (LOD 500): a person measured it on site. Who, when and how are kept with it.
  • No mark: drawn by a person. The model makes no claim about it.

Steps

  1. Pick one element or many (walls, doors, windows, rooms, any element).
  2. In Properties, open Verification.
  3. Type who checked or measured it. The date is today unless you change it.
  4. Click Mark as checked. For a site measurement choose how it was measured (tape measure, laser distance meter, scan, survey) and click Mark as field-verified (LOD 500).
  5. Mark as unverified and Take the mark off go back. Each click is one step you can undo, for the whole pick.

To mark a pick quickly: Tools › Mark as checked (typed: MARKCHECKED) marks it as checked by you, today.

What you should see

  • In the plan, an unverified element has a dashed box and a "?"; a field-verified one has a tick. Untick Show verification marks in the plan in the Audit section to hide them.
  • Schedules › Verification lists every marked element with its level, state, who, when, how and where it came from.
  • The audit lists unverified elements, and counts a field-verified element as LOD 500. See Audit the model.

From a scan

When you compare a scan with the model, Mark the matching elements as field-verified marks every element the scan saw as built within the tolerance, with the method "scan" and the tolerance in the note. See Compare a scan with the model.

The as-built model and the handover package

Build the handover package on the Assets tab puts the as-built model in the zip, with:

  • a statement on the project of how many elements are field-verified, checked, unverified and unmarked;
  • as-built/verified-elements.csv: every element and room with its state, who, when and how;
  • as-built/as-built-drawings.pdf: the drawing set as it is now;
  • the drawing changelog, when the model has issued sets.

See Assets and maintenance.

How it is kept in the IFC

Each marked element carries the property set CadCraft_Verification: State, By, On, Method, Source, Note, and LevelOfDevelopment (LOD 500 while field-verified). They are plain text properties, so other programs list them, and Find, Color by property and tag schedules can use them. The as-built statement is the property set CadCraft_AsBuilt on the project. An element without the set was not measured on site.

Next