Tutorials BimCraft help Walkthroughs

Room and area tags

Put a tag with the number, name and area on a room or an area. The tag follows it and is sized by its height on paper.

Written for BimCraft 0.10. The same help is inside the app: press F1.

What you'll do

Tag rooms and areas one by one or all at once, and move a tag where it reads well.

Where the tools are

  • Ribbon layouts: Architecture › Room & Area › Tag Room and Tag Area.
  • Classic layout: the Draw bar › Rooms menu.
  • A picked room or area: Properties › Add a tag.

Steps

  1. Choose Tag Room and click in a room, where the tag should sit.
  2. Or press Tag all untagged in the row: every room on this level that has no tag gets one, in its middle. It is one undo step.
  3. To move a tag, pick it with Select and drag it. Properties has Put it back in the middle.
  4. Tag Area works the same way for areas.

What a tag does

  • It says the number, the name and the area, in your display units.
  • It follows its room: rename the room, move a wall, and the tag's words and place change in the same step.
  • It is sized on paper: Text height on paper is in millimetres (2.5 to start). At a view scale of 1:50 a 2.5 mm tag is 125 mm tall in the model; at 1:100 it is 250 mm.
  • A room with a tag shows the tag instead of its plain label.
  • When its room or area is gone, the tag goes with it. Undo brings both back.

In the IFC

A tag is an IfcAnnotation (ObjectType ROOMTAG or AREATAG) with its text as a text literal, and the GlobalId of what it names. The text in the file gives the area in square metres.

Not built yet

  • Tag shapes of your own, and a leader line.
  • Tags on doors, windows and walls are a separate tool (see the tag styles of the sheets).

See also Rooms and room separators.